BevRC
BEV OSC 420-NTSC
| Pixels NTSC | 510x492, PAL |
Specifictions:, 1/3" Sony color CCD sensor.,
Industry standard composite video output. 420 TV-line resolution. Minimum Illumination ...BevRC
BEV OSC 420-PAL
| Pixels NTSC | 510x492, PAL |
Specifictions:, 1/3" Sony color CCD sensor.,
Industry standard composite video output. 420 TV-line resolution. Minimum Illumination ...BevRC
YS-X4 MULTI-ROTOR FLIGHT CONTROLLER---NAVIGATOR VERSION
| Your purchase includes | 1 WIFI module X1 |
Download the quick start guide here:, , What's added to the version:, 1 Target Lock & Fly encircle (No limitation), Product Features:, 1 Auto (Takeoff/ Go Home/Landing), Specification:, , Version differences:, The bluthtooth version has been cancelled beause of the compatible problem.,
2 Click/Touch & Fly To Point (No limitation) 3 Auto-Navigation ...BevRC
YS-X4 MULTI-ROTOR FLIGHT CONTROLLER---WIFI VERSION
Download the quick start guide here:, , Product Features:, 1 Auto (Takeoff/ Go Home/Landing), Your purchase Includes:, 1 the WIFI module X1, Specification:, , Version differences:, The bluthtooth version has been cancelled beause of the compatible problem.,
YS-X4 Autopilot system for multi-rotor is specially designed for Hobbyist. ...BevRC
HOBBYWING SKYWALKER QUATTRO 20A X 4 4-IN-1 SPEED CONTROL FOR QUADCOPTERS
| 3. Multiple protection features | Low voltage cut-off protection / over-heat protection / throttle signal loss protection. |
| 5. Maximum speed | 210000 RPM (2 poles motor), 70000 RPM (6 poles motor), 35000 RPM (12 poles motor). |
Features:, , Specifications:,
4-in-1 ESC from famous manufacturer specially designed for quadcopter application. ...BevRC
BEV 1.2GHZ 200MW TX FOR FPV
G TX Series:, 200mW(4，5，6，7),
If you are using a 2.4G radio, or you fly ...BevRC
UNO5800 HIGH PERFORMANCE A/V RECEIVER, NEW NEXWAVERF MODULE
: 5740MHz, 5760MHz, 5780MHz, 5800MHz, 5820MHz, 5840MHz, 5860MHz,
New desinged NexwaveRF 5G8 receiver(double the range compared with the ...BevRC
BEV 2.4G 500MW PLUG AND PLAY SYSTEM SPECIALLY DESIGNED FOR FPV
| - Working voltage | DC 7-16 volts |
| - Camera output | 12 volts |
| - 8 Selectable channels | DIP switches |
| - Working frequencies | CH1 |
| - Current consumption | 300mAh |
| - Dimensions | 14 x 26 x 39 mm (0.45" x 1" x 1.5" inches). |
| - 8 Selectable channels | DIP switches |
| - Working frequencies | CH1 |
| - Working voltage | DC 9- 13 volts- Current consumption |
| - Dimensions | 13 x 52 x 60 mm (0.4" x 2" x 2.5" inches). |
| RED | DC7-16 Volts input |
| BLACK | GND |
| RED | V output for your cam, normally 0.5V less than the DC input from the 2-pin connector. |
| BLACK | GND |
| YELLOW | VIDEO |
| WHITE | AUDIO (6.0Mhz),normally no use |
| GREEN | AUDIO(6.5Mhz),normally no use |
Download the manual here:, , Transmitter's features:, - High grade switching regulator., Receiver's features:, - Dual (2x) A/V outputs., Includes:, - BEV 2.4 GHz 500mw transmitter, TX:, Always check the color of every wires, then you won't go wrong., The 2-pin connector:, The 5-pin connector:, RX: you can also find the channel diagram on the receiver's mental cover.,
The tiny pocket size receiver besides its small size, it ...BevRC
FATSHARK M.I.G EXTERNAL HEAD TRACKER V4
,
The M.I.G. (Magnetic, Inertial, Gyro) head tracker is an external ...BevRC
LIPO BATTERY PACK FOR FATSHARK GOGGLES
,
Compatible with all of the fatshark goggles, good choice for ...BevRC
FRSKY AMPERE SENSOR-100A
| Dimension | 38*30*10mm |
| Weight | 24g |
| Measurement range | 0~100A |
| Maximum safe current | 100A |
| Sensor current consumption | 33mA |
| Update Rate | ≥1Hz |
| Model | FAS-100 |
| Dimension | 38*30*10mm |
| Weight | 24g |
| Measurement range | 0~100A |
| Maximum safe current | 100A |
| Sensor current consumption | 33mA |
| Update Rate | ≥1Hz |
| Note | When FAS-100 is used with a sensor hub, please make sure the sensor hub is V2.0. |
| http | //www.frsky-rc.com/download.asp?id=22 |
| http | //www.frsky-rc.com/download.asp?id=22 |
| http | //www.frsky-rc.com/download.asp?id=22 |
3.1 When using the FAS-100, without a FLVS-01:, 3.1.1Connect “Data Out” port of the FAS-100 directly to the “Volt” port on sensor hub using the provided cable., 3.2 When using the FAS-100, with a FLVS-01:, 3.2.1Connect the FAS-100 with, at most, two FLVS-01s and connect the “Data Out” port of FAS-100 or FLVS-01 to the “Volt” port on sensor hub using the provided cable., Driver for XP/ Win7 Vista:, FSH-01 Upgrade ROM_V2.0:, How-to_sensor hub upgrade:,
FAS-100 Category：Accessories Description 1. Introduction The FrSky Ampere Sensor (FAS-100) ...BevRC
TAROT IRON MAN 1000 OCTO FRAME
| configuration | 4114/320KV |
Specs:, Tube, : 25MM, : 1020MM, : 1070MM, : 380CM, : 250 × 240 MM, : 16MM/19MM/25MM/27MM,
Specially designed for heavy duty application,such as flight with 5DII, ...BevRC
DJI NAZA MULTI-ROTOR STABILIZATION CONTROLLER WITH GPS/COMPASS
| Features | All-in-One design |
| Normal | 0.6W (0.12A@5V) |
GPS Features include:, RTH (Return-To-Home); IOC (Intelligent Orientation Control) and Low Battery warning., Specifications:, General, MC:4.8V~5.5V, VU: 7.2V ~ 26.0 V (recommend 2S ~ 6S LiPo), MC:25g, VU:20g, MC: 45.5mm x 31.5mm x 18.5mm, VU: 32.2mm x 21.1mm x 7.7mm, Downloads:, CLICK HERE,
NAZA is a lightweight multi-axis control platform specially designed for ...BevRC
DJI PHANTOM RTF W/TX AND CHARGER
| Vertical | ± 0.8m. Horizontal |
BevRC
TAROT 2212 KV920 BLUE MOTOR
:, The, : 8MM, : 22.0mm, : 19.0mm, : 12, Poles:, 14, :, 14Turn, :3, :, 920RPM/Volt, :, 0.5Amps, : 28mm, : 38.5mm, :, 30.6mm, :, 55Grams,
Suiable for multi-rotor with whole weight 2kg, 18cm long power ...